RabbitCore SBC BL series

The RabbitCore SBC BL Series offers a full-featured control and communications solution for industrial applications. The series is designed to provide the microprocessor control and I/O used for reading instruments, timing events precisely, controlling motors, relays and solenoids.

Documentation

RabbitCore RCM2000 C-Programmable Module

Users Manual: BL1700 C-Programmable Controller

Users Manual: BL1800 C-Programmable Single-Board Computer

Users Manual: BL2600 C-Programmable Single-Board Computer with Ethernet

Dynamic C 9: Rabbit 2000 / 3000

TCP/IP Volume 1

TCP/IP Volume 2

Users Manual: An Introduction to TCP/IP For Embedded System Designers

Rabbit 2000 Microprocessor

Users Manual- Rabbit 3000 Microprocessor

Users Manual: BL2500 C-Programmable Single-Board Computer with Ethernet

Users Manual: BL2000 C-Programmable Single-Board Computer with Ethernet

Users Manual: BL2100 C-Programmable Single-Board Computer with Ethernet and Operator Interface

Users Manual: LP3500 C-Programmable Single-Board Computer

Drivers & Patches

Calibration constants patch for BL2000/BL2100 series controllers

ID Block patch for BL2000/BL2100 series controllers

Resources & Utilities

Dynamic C

Function Reference Manual: Dynamic C Integrated C Development System For Rabbit 2000 and 3000 Microp

Dynamic C 32 Function Reference

Dynamic C 32 Application Frameworks

Dynamic C 9.25 library update for BL2600

Timer B match register program for BL1800 Jackrabbit

HD44780 controller LCD software for BL1800 Jackrabbit

Hardware Resources

Schematic: LP3500 Single-Board Computer

Schematic: LP3500 Single-Board Computer Prototyping Board

Schematic: Digital I/O Accessory Board

Schematic: Rabbit Serial Programming Cable 3.3V - 5.0V

Schematic: BL2600

Schematic: BL2500

Schematic: BL2100

Schematic: LCD/Keypad Module

Schematic: BL1800 Single-Board Computer Prototyping Board

Schematic: BL2000 Single-Board Computer

Schematic: BL1800 Single-Board Computer

Schematic: BL1700 Series

Easy Reference Poster- Rabbit 3000 Microprocessor

Easy Reference Poster- Rabbit 2000 Microprocessor

Designers Handbook: Rabbit 2000 Microprocessor

Solution Guides

Technical Note: TN303 - Conformal Coating

Technical Note- TN258 - USB to RS-232 Converter Cable Users Guide

Application Note: AN408 - A Web-Configurable LabVIEW Virtual Instrument for a BL2600 and RN1100

Technical Note: TN207 Rabbit Cloning Board

Application Note: AN407 - Networking a BL2600, BL2500, BL2100 or a BL2000 with a LabVIEW Virtual Ins

Technical Note: TN229 - Flash Corruption with writeUserBlock Function

Technical Note: TN235 - External 32.768 kHz Oscillator Circuits

Technical Note: TN221 - PC Board Layout Suggestions to Reduce EMI and RF Emissions with the Rabbit 3

Technical Note- TN268 - Preventing Damage from Electrostatic Discharges to Electronic Assemblies

Technical Note: TN236 - Rabbit 3000™ IrDA Bug

Technical Note: TN233 - Interfacing the Rabbit 3000 with a Magnetic Stripe Card Reader

Technical Note: TN228 - Rabbit 3000 Parallel Port F Bug

Technical Note- TN239 - Rabbit 3000A Release

Technical Note- TN302 - Rabbit 2000 Instruction Bug

Technical Note: TN226 - Supported Flash Devices for Rabbit 2000/3000-Based Boards

Technical Note: TN227 - Interfacing External I/O with Rabbit 2000/3000 Designs

Technical Note: TN231 - Rabbit 2000 Features and Their Use in Board-Level Products

Technical Reference: Dynamic C 32 ver. 6.x Integrated C Development System

Application Note: AN403 - Getting on the Wire

How-To Videos Label