-- ============================================================= -- = DIGI-UDP-MIB : Digi UDP-Serial MIB definition = -- = = -- = Digi International Part Number: 40002258_B = -- = = -- = (c) Copyright 2002 Digi International, Inc. = -- ============================================================= DIGI-UDP-SERIAL-MIB DEFINITIONS ::= BEGIN IMPORTS digiUdpSerial FROM DIGI-SMI OBJECT-TYPE FROM RFC-1212 IpAddress FROM RFC1155-SMI; -- digiEnterprise MODULE-IDENTITY -- LAST-UPDATED "0203270100Z" -- ORGANIZATION "Digi International Inc." -- CONTACT-INFO -- " Paul Morein -- Postal: Digi International Inc. -- 11001 Bren Road East -- Minnetonka, MN 55343 -- -- Tel: 952-912-3479 -- E-mail: Paul_Morein@digi.com" -- DESCRIPTION -- "Digi Structure of UDP-Serial MIB" -- ::= { digiProtocols 13 } -- === + Textual Conventions + =========================================== Switch ::= INTEGER { off(1), on(2) } UDPOverflow ::= INTEGER { forward(1), flush(2) } DisplayString ::= OCTET STRING -- ======================================================================= -- === + UDP-Serial settings table + ====================================== -- ======================================================================= udpSerialSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpSerialSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for UDP serial configuration settings" ::= { digiUdpSerial 11 } udpSerialSettingsEntry OBJECT-TYPE SYNTAX UdpSerialSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of UDP serial settings" INDEX { udpSerialPortIndex } ::= { udpSerialSettingsTable 1 } UdpSerialSettingsEntry ::= SEQUENCE { udpSerialPortIndex INTEGER, udpSerialRmax INTEGER, udpSerialRtime INTEGER, udpSerialOverflowPolicy UDPOverflow, udpSerialStripDelimiters Switch, udpSerialDelimiters DisplayString, udpSerialRemoveDelimiters INTEGER, udpSerialValidateNext INTEGER, udpSerialResetDesinations INTEGER, udpSerialDestinationsMask DisplayString } udpSerialPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "UDP Serial Port Index" ::= { udpSerialSettingsEntry 11 } udpSerialRmax OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "UDP Serial Rmax" ::= { udpSerialSettingsEntry 12 } udpSerialRtime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "UDP Serial Rtime" ::= { udpSerialSettingsEntry 13 } udpSerialOverflowPolicy OBJECT-TYPE SYNTAX UDPOverflow ACCESS read-write STATUS mandatory DESCRIPTION "Overflow policy forward or flush" ::= { udpSerialSettingsEntry 14 } udpSerialStripDelimiters OBJECT-TYPE SYNTAX Switch ACCESS read-write STATUS mandatory DESCRIPTION "1 - off, 2 - on" ::= { udpSerialSettingsEntry 15 } udpSerialDelimiters OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "String starts with number of delimiters, followed by delimiters" ::= { udpSerialSettingsEntry 16 } udpSerialRemoveDelimiters OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Delimiters will be removed" ::= { udpSerialSettingsEntry 17 } udpSerialValidateNext OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Valid option of the next unvalid destination for the current serial port will be set to one" ::= { udpSerialSettingsEntry 18 } udpSerialResetDesinations OBJECT-TYPE SYNTAX INTEGER {ready(1), factory(2), nvram(3)} ACCESS read-write STATUS mandatory DESCRIPTION "Factory(2) : This will reset all destinations for the current serial port referenced by index to its factory default values. NVRAM(3) : This will reset all destinations for the current serial port referenced by index to the settings stored in NVRAM (at boot time)" ::= { udpSerialSettingsEntry 19 } udpSerialDestinationsMask OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "32 bit mask; 1 - if destination is valid" ::= { udpSerialSettingsEntry 20 } -- ======================================================================= -- === + UDP-Serial destinations table + ====================================== -- ======================================================================= udpSerialDestinationsTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpSerialDestinationsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for UDP destination settings" ::= { digiUdpSerial 12 } udpSerialDestinationsEntry OBJECT-TYPE SYNTAX UdpSerialDestinationsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by 2 dimentional number - port number and destination index" INDEX { udpSerialDestinationIndex } ::= { udpSerialDestinationsTable 1 } UdpSerialDestinationsEntry ::= SEQUENCE { udpSerialDestinationIndex INTEGER, udpSerialDestinationIpAddress IpAddress, udpSerialDestinationIpPort INTEGER, udpSerialDestinationName DisplayString, udpSerialDestinationRemove Switch } udpSerialDestinationIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "UDP destination index" ::= { udpSerialDestinationsEntry 11 } udpSerialDestinationIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "UDP IP Address" ::= { udpSerialDestinationsEntry 12 } udpSerialDestinationIpPort OBJECT-TYPE SYNTAX INTEGER (1..60000) ACCESS read-write STATUS mandatory DESCRIPTION "UDP IP port number" ::= { udpSerialDestinationsEntry 13 } udpSerialDestinationName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "UDP destination's description, can't be empty or more then 16 chars" ::= { udpSerialDestinationsEntry 14 } udpSerialDestinationRemove OBJECT-TYPE SYNTAX Switch ACCESS read-write STATUS mandatory DESCRIPTION "1 - off, 2 - on: destination will be deactivated" ::= { udpSerialDestinationsEntry 15 } -- ======================================================================= -- === + UDP-Serial statistic table + ====================================== -- ======================================================================= udpSerialStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpSerialStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for UDP serial statistic items" ::= { digiUdpSerial 13 } udpSerialStatisticsEntry OBJECT-TYPE SYNTAX UdpSerialStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number" INDEX { udpSerialStatisticIndex } ::= { udpSerialStatisticsTable 1 } UdpSerialStatisticsEntry ::= SEQUENCE { udpSerialStatisticIndex INTEGER, udpSerialStatisticDgramTxCnt INTEGER, udpSerialStatisticDgramTxBytes INTEGER, udpSerialStatisticDgramRxCnt INTEGER, udpSerialStatisticDgramRxBytes INTEGER, udpSerialStatisticSerialTxBytes INTEGER, udpSerialStatisticSerialRxBytes INTEGER, udpSerialStatisticDgramHostUnreach INTEGER, udpSerialStatisticDgramNetErrors INTEGER, udpSerialStatisticSerialPortBusy INTEGER, udpSerialStatisticSerialErrors INTEGER, udpSerialStatisticDgramBytesLost INTEGER, udpSerialStatisticSerialBytesLost INTEGER, udpSerialStatisticPortReconfigured INTEGER, udpSerialStatisticPortClear INTEGER } udpSerialStatisticIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "UDP statistic index" ::= { udpSerialStatisticsEntry 11 } udpSerialStatisticDgramTxCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Datagrams transmitted" ::= { udpSerialStatisticsEntry 12 } udpSerialStatisticDgramTxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Datagram payload bytes transmitted" ::= { udpSerialStatisticsEntry 13 } udpSerialStatisticDgramRxCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Datagrams received" ::= { udpSerialStatisticsEntry 14 } udpSerialStatisticDgramRxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Datagram payload bytes received" ::= { udpSerialStatisticsEntry 15 } udpSerialStatisticSerialTxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bytes written to serial port" ::= { udpSerialStatisticsEntry 16 } udpSerialStatisticSerialRxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bytes read from serial port" ::= { udpSerialStatisticsEntry 17 } udpSerialStatisticDgramHostUnreach OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "One of our transmitted datagrams caused us to receive a host unreachable ICMP packet." ::= { udpSerialStatisticsEntry 18 } udpSerialStatisticDgramNetErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Generic network errors that aren't host unreachable, including receiving unexpected ICMP packets, recvfrom failing, or sendto failing." ::= { udpSerialStatisticsEntry 19 } udpSerialStatisticSerialPortBusy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Datagram could not be forwarded because port was in use." ::= { udpSerialStatisticsEntry 20 } udpSerialStatisticSerialErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Generic serial errors that aren't " ::= { udpSerialStatisticsEntry 21 } udpSerialStatisticDgramBytesLost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bytes which arrived in datagrams which we threw out on the way to the serial port" ::= { udpSerialStatisticsEntry 22 } udpSerialStatisticSerialBytesLost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bytes which arrived on the serial port which we threw out before they could be transmitted successfully in datagrams." ::= { udpSerialStatisticsEntry 23 } udpSerialStatisticPortReconfigured OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Increments whenever config is re-eval'd." ::= { udpSerialStatisticsEntry 24 } udpSerialStatisticPortClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Clears UDP Serial Port Statistics" ::= { udpSerialStatisticsEntry 25 } -- ======================================================================= -- === + Clear statistic + ============================================== -- ======================================================================= udpSerialStatisticsClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Clears UDP Serial Statistics" ::= { digiUdpSerial 14 } END